manufacturer category series package voltage class rev . date ec36 series ? crystal clock oscillators ? lvcmos output ? +3.3v supply voltage ? tri-state output function ? 4 pad ceramic smd package ? low stand-by current ? rohs compliant (pb-free) ecliptek corp. oscillator ec36 ceramic 3.3v os91 02/10 oscillator ec36 electrical specifications 800-ecliptek www.ecliptek.com for latest revision 146 specifications subject to change without notice. notes _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______ h 1.3 l 5.0 w 3.2 frequency range (f o ) operating temperature range (otr) storage temperature range (str) supply voltage (v dd ) input current (i dd ) frequency tolerance/stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time (t r /t f ) duty cycle (sym) load drive capability (c load ) tri-state input voltage standby current start up time (t s ) rms phase jitter 1.000mhz to 9.999mhz 10.000mhz to 34.999mhz 35.000mhz to 49.999mhz 50.000mhz to 70.000mhz 70.001mhz to 125.000mhz 125.001mhz to 155.520mhz inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, first year aging at 25c, shock, and vibration 20% to 80% of waveform, 1.000mhz to 39.999mhz 20% to 80% of waveform, 40.000mhz to 79.999mhz 20% to 80% of waveform, 80.000mhz to 100.000mhz 20% to 80% of waveform, 100.001mhz to 155.520mhz at 50% of waveform at 50% of waveform no connection v ih : 90% of v dd minimum v il : 10% of v dd maximum disabled output: high impedance 12khz to 20mhz offset frequency -10c to +70c -40c to +85c -55c to +125c 3.3v dc 10% 8ma maximum 10ma maximum 25ma maximum 35ma maximum 40ma maximum 50ma maximum 100ppm maximum 50ppm maximum 25ppm maximum 20ppm maximum 90% of v dd minimum (i oh = -4ma) 10% of v dd maximum (i ol = +4ma) 6nseconds maximum 4nseconds maximum 3nseconds maximum 2nseconds maximum 50 10(%) (standard) 50 5(%) (optional) 15pf maximum enables output enables output disables output: high impedance 10a maximum 10mseconds maximum 1pseconds maximum 1mhz to 110mhz, 120mhz, 122.88mhz, 125mhz, 127.872mhz, 133mhz, 155.52mhz
manufacturer category series package voltage class rev . date ecliptek corp. oscillator ec36 ceramic 3.3v os91 02/10 ec36 00 et t ts - 30.000m tr frequency tolerance / stability 00 = 100ppm maximum 45 = 50ppm maximum 25 = 25ppm maximum 20 = 20ppm maximum operating temperature range blank = -10c to +70c et = -40c to +85c part numbering guide *compliant to eia 481a mechanical dimensions all dimensions in millimeters marking specifications environmental/mechanical specifications suggested solder pad layout all dimensions in millimeters tape and reel dimensions all dimensions in millimeters tolerances= + 0.1 800-ecliptek www.ecliptek.com for latest revision 147 specifications subject to change without notice. pin 1: tri-state pin 2: case ground pin 3: output pin 4: supply voltage packaging options blank = bulk tr = tape & reel frequency duty cycle blank = 50 10(%) t = 50 5(%) marking orientation 3.20 0.20 5.00 0.20 1.3 max note: pin 1 chamfer not shown. 2.20 0.15 2.54 0.15 4 3 1 2 1.00 0.20 (x4) 1.20 0.20 1.20 0.20 (x4) m n o p q 1.5 min 50 min 20.2 min 13.00.2 40 min r s t u v qty/reel 2.5 min 10 min 22.4 max 360 max 16.4 +2/-0 1,000 reel a b c d e f 16.00.3 7.50.1 6.750.1 4.00.1 2.00.1 f g h j k l 8.00.1 b0* 1.5 +0.1- 0.0 a0* 0.30 0.1 k0* tape line 1: e xx.xxx frequency in mhz (5 digits maximum + decimal) line 2: xx y zz week of year last digit of year ecliptek manufacturing identifier characteristic specification esd susceptibility mil-std-883, method 3015, class 1, hbm: 1500v fine leak test mil-std-883, method 1014, condition a flammability ul94-v0 gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-883, method 2002, condition b moisture resistance mil-std-883, method 1004 moisture sensitivity j-std-020, msl 1 resistance to soldering heat mil-std-202, method 210, condition k resistance to solvents mil-std-202, method 215 solderability mil-std-883, method 2003 temperature cycling mil-std-883, method 1010, condition b vibration mil-std-883, method 2007, condition a
|
